Packaging Machine Manufacturers Exporters and Suppliers in Turkey

General Characteristics: • Automatically auger filling system, • Precise serial packaging between 20 and 3000 grams, • PLC controlled, touch screen, • The right and left settings of the packaging are made by a reducer motor, • The product contact surfaces made are from stainless steel: ANSI 304-CR-NI, • Easy forming collar replacing • Cost effective, • High Accuracy, • Sophisticated design,

GENERAL FEATURES Our machines have a unique feature comparing to our competitors. Our new cup's design enables producing cups in lower manufacturing costs up to 40% . Our Products: Slimcup6 (7500 Cups/hour) Slimcup10 (12000 Cups/hour) Slimcup12 (16000 Cups/hour) Slimcup 20 (26000 Cups/hour) Technical Features: Stainless steel (AISI 304) Protection level (IP 65) “EC” compliance with regulations safety standards Integrated with open technology servo control system Ergonomic design Round tank with optional CIP HEPA filter-equipped Different container sizes and combinations Tight bonding and sealing Providing high hygiene with the butterfly valve High filling accuracy Servo technology Modular construction Guarantee quality Space saving Roborts loading or manual product packaging system Cataloge: https://drive.google.com/open?id=0BwTUQzaLPpRUYmdDejZ1czFTbW8

Machine type: ERPAK YRV Full Automatic Horizantal Bag Filling and Packaging Machine - Sachet type: 3 or 4 side sealed - Products to be packaged: Powdered soup, spices, milk powder, coffee etc powder or powdered products - Bag sizes: Min 100mm X 100mm(h), Max: 130mmX160mm(h) - Filling capacity: min. 40gr- max 100-150gr.( max gr in a bag depends on specific gravity of powders and max sachet sizes) - Machine speed : 55-65sachets/minute - Electric Installation : 3kW/h 380volt 50hz. - Air consumption: 300 lt/minute - Dimension of Machine: 333cm X 105cm X 260cm (high). - Weight of machine: 800kg - Packing material: laminated paper and aluminum folio+PE

General Characteristics: • Possibility of both auger and volumetric filling in same machine, • Precise serial packaging between 20 and 2000 grams, • Easy to switch between the auger and volumetric filling units, • PLC controlled, touch screen, • The right and left settings of the packaging are made by a reducer motor, • The product contact surfaces made are from stainless steel: ANSI 304-CR-NI, • Easy forming collar replacing • Cost effective, • High Accuracy, • Sophisticated design

SAM FPM 125 FULL AUTOMATIC FLOUR FILLING AND PACKAGING LINE makes the filling and closing of the product into ready paper bags. The filled bag is closed through bag closing machine equipped with hot glue sprayer. During the process, extra part of the bag is cut and folded. By applying hot glue, final folding is done. Then, production and expiry dates are printed on the bags by an inkjet printer. The bags are then bundled and shrinked in required number.

General General Characteristics: • Volumetric weighing system, • Weight sensitivity depends on the size of the items to be filled, • Filling capacity between 100 and 1000 grams, • PLC controlled, touch screen, • The right and left settings of the packaging are made by a reducer motor, • The product contact surfaces made are from stainless steel: ANSI 304-CR-NI, • Easy forming collar replacing, • Cost effective, • Sophisticated design,

General Characteristics: • Precise serial packaging between 1000 and 9000 grams, • Automatic length size setting, which can work without photocell or photocell, • PLC controlled, touch screen, • The right and left settings of the packaging are made by a reducer motor, • Precise and smooth bonding with P.I.D controlled vertical and horizontal heat, • The product contact surfaces made are from stainless steel: ANSI 304-CR-NI, • Easy forming collar replacing, • Rigid machine body • High Accuracy, High versatility • Sophisticated design, Covers a vast scope of products.

General Characteristics: • PLC controlled, touch screen, • Carousel driven by a servo motor. • Piston movements with magnetic sensor, • Easy carousel container fixture (kit) replacing, • Easy forming collar replacing, • The right and left settings of the packaging are made by a reducer motor, • The product contact surfaces made are from stainless steel: ANSI 304-CR-NI, • High Accuracy, High versatility • Cost effective, • Sophisticated design, • Automatic stop function when the packaging foil is empty, • Automatic stop function when the product is empty

SA-S Semi Automatic Sack Filler is a machine designed for companies that have low or new production facilities. Very easy to use and precise. It is designed to be used for sack filling. This user friendly semi-automatic packaging machine provides precise weighing and is designed to work. Weighing precision depends on the type of product and its density. Packaging speed depends on operator performance and type of product. All surfaces of the machine that come into contact with the product is AISI 304 stainless steel. The SA-S Semi Automatic Filling Machine has a touch screen and makes it easy to use. Via this touch screen, weight can be adjusted. This packaging machine is easy to install and use in narrow and small spaces due to its separable structure. Feeding unit can be added with automatic elevator according to the user's request. In the SA-S Semi Automatic Sack Filling Machine is automatic sewing machine can be added according to the needs of the user. In addition, sack filling transfer tape will provide convenience and time saving in your production line. SA-S Semi Automatic Sack Filling Machine is generally preferred by medium level companies.

• Machine is enough for low and mid productive capacities. This user friendly semi- automatic packaging machine provides precise weighing and designed to worked with pre-sealed bags, • The weighing mechanism is able to work with easy flow powder and granule type products, • Packaging speed depends on operator performance and type of product, • Weighing precision depends on type of product and density of products, • Vibration speed can be set according to weighing precision, • All surfaces of machine that contact with product is stainless stell AISI304, • Product discharge and sealing are made with pedal, • Easy use with HMI Operator Screen, • Weighing limit, Sealing temperature and sealing time is set by HMI, • Operator can use bottle or ready bag, • Easy installation and easy carriage by seperable parts, • Optionally, automatic bucket conveyor and product feeding unit can be added, • Optionally, sealing unit can be added.

• It is a machine designed for companies with low production capacity or new job. Easy to use and precise, • Suitable for ready-to-use pouch. It can realize fast and precise weighing in ready bags. Automatic feeding is available, • Production speed may vary according to user’s condition, • It is designed to package all kinds of powder food and non-food products, • Thanks to the controllable servo motor, the screw filling unit ensures a fast and precise filling, • The product weight is adjusted by the number of turns of the filling screw, • Screw sizes may vary depending on product type and target filling quantity, • The mixer system prevent the product jamming inside the hopper, • All surfaces of machine that contact with product is stainless stell AISI304, • According to the demand can be added to the packaging mouth sealing unit, • The screw feeding unit is included in the system, • It is easy to install and use in narrow and small areas with its separable structure, • Easy to clean and maintain thanks to its simple structure.

Winding shape: single ear packaging, double ear packaging, envelope (baton-napoliten) packaging, aluminum spinning. Paper cutting mechanism with servo motor and photocell are available. The materials that can be used are aluminum foil, pvc, pp, pet films. The machine simultaneously feeds the connected feeding machine and the mixed chocolates to the machine's drive, to the packaging speed. All of the conveyor belts on the machine have speed control device. Packing speed is between 200-300 pcs / minute according to product grade. TECHNICIAL SPECIFICATIONS Capacity 200-300 pieces / min. Total power 7 Kw

• Suitable for granule type of products. The weighing unit is controlled by a seperate microprocessor and touch screen, • Supports many usefull functions such as multi dumping, automatic product conveyor control, self cleaning, recipe record for different products, different language and etc. • Different amount of weighing buckets in different dimensions should be provided with respect to type of product. Parts touching to products are easy to dismount and cleaning. • All surfaces touching to products are AISI 304 stainless steel, • Easy demountable forming tube, • Easy adjustable speckle control and more precise package length, • Due to continuously controlled printer error, prevents unprinted and faulty print, • Coil unwinding is driven by AC motors, • Horizontal jaw press and cutting unit are driven by pneumatic, • Cold or hot sealing techniques can be applied according to the packaging type, • Continuously control tension • Centering film due to automatic lateral adjustment of film, • Suitable for CE standards, • Different language options and easy-to-use touch screen. Optional Equipments: • Nitrogen filling unit • Screw feeding unit • Conveyor band • Special Vacum supported belts. (Increases belt life time and machine speed) • Eurohole / Hanger Hole • Printer with barcode and date writing feature • Contact us for different type of packages, products and capacities.

• Volumetric filling system is suitable for products which are able to free falling and homogenous in density, • Weight of each filling is controlled by adjusting the dimensions of filling cups, • Different cups with adjustable dimension should be used for different type of products. The sensitivity of target weight is equal to sensitivity of product density, • All surfaces touching to products are AISI 304 stainless steel, • Easy demountable forming tube, • Easy adjustable speckle control and more precise package length, • Due to continuously controlled printer error, prevents unprinted and faulty print, • Coil unwinding is driven by AC motors, • Horizontal jaw press and cutting unit are driven by pneumatic, • Cold or hot sealing techniques can be applied according to the packaging type, • Continuously control tension • Centering film due to automatic lateral adjustment of film, • Suitable for CE standards, • Different language options and easy-to-use touch screen. Optional Equipments • Nitrogen filling unit • Screw feeding unit • Conveyor band • Special Vacum supported belts. (Increases belt life time and machine speed) • Eurohole / Hanger Hole • Printer with barcode and date writing feature • Contact us for different type of packages, products and capacities.

• Suitable for granule type of products. The weighing unit is controlled by a seperate microprocessor and touch screen, • Supports many usefull functions such as multi dumping, automatic product conveyor control, self cleaning, recipe record for different products, different language and etc. • Different amount of weighing buckets in different dimensions should be provided with respect to type of product. Parts touching to products are easy to dismount and cleaning, • All surfaces touching to products are AISI 304 stainless steel, • Easy demountable forming tube, • Suitable for Quadro package, • Easy adjustable speckle control and more precise package length, • Due to continuously controlled printer error, prevents unprinted and faulty print, • Coil unwinding is driven by AC motors, • Horizontal jaw press and cutting unit are driven by pneumatic, • Cold or hot sealing techniques can be applied according to the packaging type, • Continuously control tension • Centering film due to automatic lateral adjustment of film, • Suitable for CE standards, • Different language options and easy-to-use touch screen. Optional Equipments: • Nitrogen filling unit • Screw feeding unit • Conveyor band • Special Vacum supported belts. (Increases belt life time and machine speed) • Eurohole / Hanger Hole • Printer with barcode and date writing feature • Contact us for different type of packages, products and capacities.

• The machine is designed for powder and similar fine products. The target weight of each filling is controlled with fast and accurate servo driven specific auger (worm screw), • The auger type and diameter changes with respect to product type and target weight, • All surfaces touching to products are AISI 304 stainless steel, • Easy demountable forming tube, • Suitable for Quadro package, • Easy adjustable speckle control and more precise package length, • Due to continuously controlled printer error, prevents unprinted and faulty print, • Coil unwinding is driven by AC motors, • Horizontal jaw press and cutting unit are driven by pneumatic, • Cold or hot sealing techniques can be applied according to the packaging type, • Continuously control tension, • Centering film due to automatic lateral adjustment of film, • Suitable for CE standards, • Different language options and easy-to-use touch screen. Optional Equipments: • Nitrogen filling unit • Screw feeding unit • Conveyor band • Special Vacum supported belts. (Increases belt life time and machine speed) • Eurohole / Hanger Hole • Printer with barcode and date writing feature • Contact us for different type of packages, products and capacities.

• Suitable for granule type of products. The target weight is controlled by linear vibration units. With respect to product type and desired speed; 2 or 4 line types are available, • The accuracy of each filling is controlled by tuning each line vibration magnitude. The average accuracy is depend on product type, • All surfaces touching to products are AISI 304 stainless steel, • Easy demountable forming tube, • Easy adjustable speckle control and more precise package length, • Due to continuously controlled printer error, prevents unprinted and faulty print, • Coil unwinding is driven by AC motors, • Horizontal jaw press and cutting unit are driven by pneumatic, • Cold or hot sealing techniques can be applied according to the packaging type, • Continuously control tension • Centering film due to automatic lateral adjustment of film, • Suitable for CE standards, • Different language options and easy-to-use touch screen. Optional Fittings and Equipments • Nitrogen filling unit • Screw feeding unit • Conveyor band • Special Vacum supported belts. (Increases belt life time and machine speed) • Eurohole / Hanger Hole • Printer with barcode and date writing feature • Contact us for different type of packages, products and capacities.

• The machine is designed for powder and similar fine products. The target weight of each filling is controlled with fast and accurate servo driven specific auger (worm screw), • The auger type and diameter changes with respect to product type and target weight, • All surfaces touching to products are AISI 304 stainless steel, • Easy demountable forming tube, • Easy adjustable speckle control and more precise package length, • Due to continuously controlled printer error, prevents unprinted and faulty print, • Coil unwinding is driven by AC motors, • Horizontal jaw press and cutting unit are driven by pneumatic, • Cold or hot sealing techniques can be applied according to the packaging type, • Continuously control tension, • Centering film due to automatic lateral adjustment of film, • Suitable for CE standards, • Different language options and easy-to-use touch screen. Optional Fittings and Equipments: • Nitrogen filling unit • Screw feeding unit • Conveyor band • Special Vacum supported belts. (Increases belt life time and machine speed) • Eurohole / Hanger Hole • Printer with barcode and date writing feature • Contact us for different type of packages, products and capacities.

HPR_SV5000 Work with Perfect Match Of Mechanic and Servo Motor Technology Standart of Servo Motor Performed On Horizontal Jaw and Film Pulling System Work Fast ,Sensitive And Stable With Servo Motor Technology User Frindly ,Nearly there is no Maintenace need Control by digital touch screen size of 10 " contains 65536 color long-term Coating magnetic insulator used for coating machine parts Roller group owning air shaft for rapidly connect packaging material Lower Noise Level Stainless steel (Cr-Ni)Collar -Tube group Ability to Control the coil of packaging material Ability to Work , with and with out Photocells Production quantitiy can be control by set the machine target Dealy production control Alarm and diagnostic check system and option to see a feedback of past mistake Convergence and divergence the packaging material path by touch screen Change a Collar - tube grope without using any hand tools Easy and dynamic work with the machine system by the tochscreen Toch screen containing thermal Touch System High Safety windows Option to adjust horizontal Jaw working area in mm by using touchscreen Abilaty to adjust pack length in mm range with touch screen user panel

HPR_CM5000 Work with Perfect Match Of Mechanic and Servo Motor Technology Standart of Servo Motor Performed On Horizontal Jaw and Film Pulling System Work Fast ,Sensitive And Stable With Servo Motor Technology User Frindly ,Nearly there is no Maintenace need Control by digital touch screen size of 10 " contains 65536 color long-term Coating magnetic insulator used for coating machine parts Roller group owning air shaft for rapidly connect packaging material Lower Noise Level Stainless steel (Cr-Ni)Collar -Tube group Ability to Control the coil of packaging material Ability to Work , with and with out Photocells Production quantitiy can be control by set the machine target Dealy production control Alarm and diagnostic check system and option to see a feedback of past mistake Convergence and divergence the packaging material path by touch screen Change a Collar - tube grope without using any hand tools Easy and dynamic work with the machine system by the tochscreen Toch screen containing thermal Touch System High Safety windows Option to adjust horizontal Jaw working area in mm by using touchscreen Abilaty to adjust pack length in mm range with touch screen user panel

FMQ-W Quadro Packaging Machine is suitable for high precision packaging of fragile products. Our fragile products packaging machine is attract attention with its special design to 25% angle inclined. So that disintegration and breakage are prevented in the packaging process of sensitive products. It is controlled by a microprocessor independent of the packaging machine. The electronic balance in the machine is controlled via a touch screen independent of the packaging machine. It has features such as automatic cleaning, multi unloading, automatic product feeding, parameter recording for different products, different language support. suitable for quadro packaging. It can be manufactured with different number and size of pan according to product type, speed and sensitivity information. Pan and feeding mechanisms are easy to remove and clean. All surfaces in contact with the product are AISI 304 stainless steel and are suitable for foods. Easy change of collar set enables quick package change. Precise package length adjustment with easy adjustable speckle sensor. FMQ-W Multiple Electronic Weighing Quadro Packaging Machine prevents unprinted and faulty printing with automatic stopping process due to continuously controlled printer error. It is equipped with AC motor driven film sliding unit. Pneumatically driven horizontal jaw pressing and cutting unit can make very good packaging. Depending on the type of packaging, cold or hot bonding techniques can be applied. It is also suitable for installation in accordance with CE standards. You can make your operations easier by the options of using different languages and the easy-to-use touch screen. The product is very popular with users and allows you to do more with the processing speed. By this way you can fit more packaging in less time. Optional Equipment: -Nitrogen filling unit -Screw feeding unit -Output Conveyor -Vacuum belt -Eurohole / Strap Hole -Printer with barcode and date writing

Vertical Packaging Machines Vertical packaging machines are used for packing different products (food and non-food) into different style of bags that shaped by the packaging machine from the film roll. The direction of the movement of the film on the tube of the packaging machine is vertical – downwards. The vertical packaging machines work in two different motions; Intermittent Motion for normal speed and high performance continuous motion designed for high speed requirement. HIPOMAK packaging machines are the first in Turkey in terms of its mechanic, digital electronics and technology. Efficiency is the most important aspect of HIPOMAK packaging machines. They could be designed in every needed size. So, this is accepted as an evidence for sealing quality, efficiency and weight sensitivity. They works under a high security precaution, they have been designed to work 24 hours. They are Suitable for different types of filling system; multi-head weighers, Linear Weighers, volumetric dozing systems, Auger screw filling units. Sonoma CH250/CH350 Series The new Sonoma Series are modular high performance continuous motion vertical form fill and seal machines for traditional and fragile products. Continuous motion is a generic term that is used for various different motion technologies in the packaging industry and carries the meaning of mechanism that constantly movingwithout pausing. It is tested at the speed of 200 mechanical cycles per minute. The novelty of the continuous sealing system is that enables 100% hermetic seals to be obtained at high speeds and reduces the possible negative effects of the impact of the product falling against closed sealing jaws, or the seal itself, that can occur on standard intermittent machines. It is preferred not only for its speed but for preventing product breaking also. Main Features Continuous motion system Parts in contact with product in AISI 304 stainless steel Various Types of Bags, pillow, gusset, block bottom, string bags etc. Main machine movements (horizontal sealing group and film driving group) are driven by means of independent brushless Servo motors. Motion-controller system is only one controller capable of coordinating all the servo motors, all the inputs-outputs, all the control functions of the line, replacing the PLC. Continuous Vertical and Horizontal Sealing ensure 100% non-leakage and smooth sealing 12” industrial PC man-machine interface (Diskless, Fan-less, low power) that uses a Microsoft Windows XP Embeddedoperating system with capability of remote access through internet and software updating easier. Extremely simple and easy to manage all machine parameters. P.I.D Heating System provides precision and stable horizontal and vertical heat sealing. Film Cut-off is controlled by photo eye on registered film or by incremental encoder on neutral films. Auto-Film Centering System adjusts independent roll support to center the film on the tube collar automatically. Out-of-filmSignal with automatic stop of the machine and quick connection between the finished roll and the new roll. Auto Film-Unwinding Unit controlled by expansion type reel-holder shaft with independent motor Self-Centering Drive Belt controlled by adjustable pneumatic pressure feeds the Film precisely. Film Tension Sensor indicates sufficient film tension. Dancer Arm Roller provides continuous smooth tension for continuous bag forming and registration. Safety is obtained by Automatic stop of the machine in case of incorrect closure of the safety doors or operation malfunction, with message on the display Screen. Different Filling Systems Adaptable for Multi-head Weigher, Linear Weigher, Volumetric Dosing, Auger Filler, Piston filler etc. Wrapping materials; Polypropylene, laminates and coupled materials in general, barrier film, water-soluble film, film of biological origin, and other heat sealing materials such as polyethylene. Suitable for CE standarts OPTIONAL FITTINGS/EQUIPMENTS Adaptable for different sealing systems such as; impulse sealing, carrier handle bag, easy-open bag, euro-slot bag, round hole bag, string bags, straight cut, tear notch cut, and zig-zag cut. Side Gusseting System for producing squared bottom bags. Vacuuming Supported Belts (extend belt life time and exceed speed of the machine up 15%) Gas Flushing System. Air conditioning on the control cabinet. Static Eliminator. Printer. Auto Splicing Unit.

SAM VPM 900 VERTICAL FILLING AND PACKAGING MACHINE WITH MULTIHEAD WEIGHER is suitable for filling and packaging granular products from 20gr up to 1kg. The machine is either equipped with a 10 heads or 14 heads weigher. With the feeding through an elevator or directly from the bunker, the required amount of the product is filled into the bag. The machine uses ready material rolls. The required bag type is formed. Then the filling process is finished by sealing. The machine can be equipped with feeding systems, photocell systems and printers.

• Suitable for granule type of products.Reliable and incredibly fast continuous motion packaging machine, • The weighing unit is controlled by a seperate microprocessor and touch screen, • All surfaces touching to products are AISI 304 stainless steel, • Easy demountable forming tube, • Easy adjustable speckle control and more precise package length, • Due to continuously controlled printer error, prevents unprinted and faulty print, • Coil unwinding is driven by AC motors. • Horizontal jaw press and cutting unit are driven by pneumatic, • Cold or hot sealing techniques can be applied according to the packaging type, • Continuously control tension, • Centering film due to automatic lateral adjustment of film, • Suitable for CE standards, • Different language options and easy-to-use touch screen. Optional Equipments: • Nitrogen filling unit • Screw feeding unit • Conveyor band • Special Vacum supported belts. (Increases belt life time and machine speed) • Eurohole / Hanger Hole • Printer with barcode and date writing feature • Contact us for different type of packages, products and capacities.

The BM-XL Linear Weighing Machine is suitable for packaging powder and granule products. It can be preferred for any type of product in the production of high-weight packaging with the choice of linear, weighing or screw filling unit. It can be equipped with different types and sizes of filling units according to product type and targeted capacity. Filling sensitivity may vary depending on product type and density. All surfaces in contact with the product are AISI 304 stainless steel and suitable for food. Easy capture kit set. It is able to design easy speckle. Continuous control of the printer is connected to the automatic stopping process is avoided unprinted and incorrect printing. Bike sliding film riding unit with AC motor. Pneumatic orientation horizontal jaw welding and cutting unit is made more robust. Cold or hot welding techniques depending on the type of packaging. It is capable of assembling in accordance with CE standards. You can make your operations easier by the options of using different languages and the easy-to-use touch screen. The product is very popular with users and allows you to do more with the processing speed. By this way you can fit more packaging in less time. Optional Equipment: -The hold or easy transport equipment, -Pre-line transfer equipment with screw or bucket, -Take away conveyor, -Post-line stacking and transfer bands, -Thermal Transfer or Inkjet printer date writing.

• Suitable for granule type of products. The weighing unit is controlled by a seperate microprocessor and touch screen, • Supports many usefull functions such as multi dumping, automatic product conveyor control, self cleaning, recipe record for different products, different language and etc. Different amount of weighing buckets in different dimensions should be provided with respect to type of product. Parts touching to products are easy to dismount and cleaning, • All surfaces touching to products are AISI 304 stainless steel, • Easy demountable forming tube, • Easy adjustable speckle control and more precise package length, • Due to continuously controlled printer error, prevents unprinted and faulty print, • Coil unwinding is driven by AC motors. • Horizontal jaw press and cutting unit are driven by pneumatic, • Cold or hot sealing techniques can be applied according to the packaging type, • Suitable for CE standards, • Different language options and easy-to-use touch screen. Optional Equipments: • Nitrogen filling unit • Screw feeding unit • Conveyor band • Special Vacum supported belts. (Increases belt life time and machine speed) • Eurohole / Hanger Hole • Printer with barcode and date writing feature • Contact us for different type of packages, products and capacities.

• Volumetric filling system is suitable for products which are able to free falling and homogenous in density. • Weight of each filling is controlled by adjusting the dimensions of filling cups • Different cups with adjustable dimension should be used for different type of products and the sensitivity of target weight is equal to sensitivity of product density, • All surfaces touching to products are AISI 304 stainless steel, • Easy demountable forming tube, • Easy adjustable speckle control and more precise package length, • Due to continuously controlled printer error, prevents unprinted and faulty print, • Coil unwinding is driven by AC motors, • Horizontal jaw press and cutting unit are driven by pneumatic, • Cold or hot sealing techniques can be applied according to the packaging type, • Suitable for CE standards, • Different language options and easy-to-use touch screen. Optional Equipments: • Nitrogen filling unit • Screw feeding unit • Conveyor band • Special Vacum supported belts. (Increases belt life time and machine speed) • Eurohole / Hanger Hole • Printer with barcode and date writing feature • Contact us for different type of packages, products and capacities.

• Suitable for granule type of products. The target weight is controlled by linear vibration units. With respect to product type and desired speed; 2 or 4 line types are available. • The accuracy of each filling is controlled by tuning each line vibration magnitude. The average accuracy is depend on product type, • All surfaces touching to products are AISI 304 stainless steel, • Easy demountable forming tube, • Easy adjustable speckle control and more precise package length, • Due to continuously controlled printer error, prevents unprinted and faulty print, • Coil unwinding is driven by AC motors, • Horizontal jaw press and cutting unit are driven by pneumatic, • Cold or hot sealing techniques can be applied according to the packaging type, • Suitable for CE standards, • Different language options and easy-to-use touch screen. Optional Equipments: • Nitrogen filling unit • Screw feeding unit • Conveyor band • Special Vacum supported belts. (Increases belt life time and machine speed) • Eurohole / Hanger Hole • Printer with barcode and date writing feature • Contact us for different type of packages, products and capacities.

• The machine is designed for powder and similar fine products. The target weight of each filling is controlled with fast and accurate servo driven specific auger (worm screw), • The auger type and diameter changes with respect to product type and target weight, • All surfaces touching to products are AISI 304 stainless steel, • Easy demountable forming tube, • Easy adjustable speckle control and more precise package length, • Due to continuously controlled printer error, prevents unprinted and faulty print, • Coil unwinding is driven by AC motors, • Horizontal jaw press and cutting unit are driven by pneumatic, • Cold or hot sealing techniques can be applied according to the packaging type, • Suitable for CE standards, • Different language options and easy-to-use touch screen. Optional Equipments: • Nitrogen filling unit • Screw feeding unit • Conveyor band • Special Vacum supported belts. (Increases belt life time and machine speed) • Eurohole / Hanger Hole • Printer with barcode and date writing feature • Contact us for different type of packages, products and capacities.

General Characteristics: • Automatically auger, volumetric, Multi Head Weigher filling system, • Precise serial packaging between 20 and 1000 grams, • PLC controlled, touch screen, • The product contact surfaces made are from stainless steel: ANSI 304-CR-NI, • Easy forming collar replacing • Cost effective, • High Accuracy, • Sophisticated design • Compliance with occupational safety rules • Maximum speed • Low maintenance cost and operational efficiency • Packing speed according to selected packing roll width & length and product density criteria.

Honey, jam, butter, margarine ,tomate paste, ketchup, mayonnaise ,yoghurt,fruit yoghurt, chococream, pudding, tahini, molasses, etc.

Food industry: For packing cheese varieties, olive, salami, sausage, savory sausage, chicken , fish products, shrimp, squid, meatball, pastry, pizza, kadayifi (sweet pastry), thin dough layer, manti (pasty), helva (sweetmeat prepared by sesame oil), vegetables,fruit,dried fruit pulp ,date, etc. Other industries: Medical products, etc.

Bags type: Standing pouch / DOYPACK with zipper • The zipper for to opening and closing of the product as many times as need. • Filling system and Products to be packaged: * Auger filler for Powder products such as spices, coffee, powdered soup etc * Volumetric filler or Electronic weigher for granule products such as seeds,dried fruits, candy, olive etc * Liquid filler for liquids such as juice, olive oil etc liquids. Technical specifications • Bags width : min 100mm –max 160mm. • Bags lenght(h): min.120mm- max.230mm • Stand up width : min.60mm- max 80mm . • Packing material: Pet+PE, PET+Alu+PE and Metalize • The machine main frame is made of normal steel, and all the parts in contact with the products will be made of stainless steel. • Automation: PLC (Type of PLC System is L.G.) • Electric Installation : 5kW/h 380volt 50hz.trifaze • Air consumption 500 lt/minute/ 5Atü • Dimension of Machine: 600cm X 130cm X 160cm (high)+filling unit. • Weight of machine: 1300kg • Machine speed: 35-45 bags/minute.