Vertical Packaging Machine Suppliers, Exporters and Manufactures in Turkey.

General Characteristics: • Automatically auger filling system, • Precise serial packaging between 20 and 3000 grams, • PLC controlled, touch screen, • The right and left settings of the packaging are made by a reducer motor, • The product contact surfaces made are from stainless steel: ANSI 304-CR-NI, • Easy forming collar replacing • Cost effective, • High Accuracy, • Sophisticated design,

General Characteristics: • PLC controlled, touch screen, • Carousel driven by a servo motor. • Piston movements with magnetic sensor, • Easy carousel container fixture (kit) replacing, • Easy forming collar replacing, • The right and left settings of the packaging are made by a reducer motor, • The product contact surfaces made are from stainless steel: ANSI 304-CR-NI, • High Accuracy, High versatility • Cost effective, • Sophisticated design, • Automatic stop function when the packaging foil is empty, • Automatic stop function when the product is empty

-Pack Type: Pillow Bag, Flatbag - Products to be packaged: Spices, rice flour, coffee, chemical and agricultural powder and powder products. Filling capacity: min. 20gr - max. 500gr Bags type: pillow bag Technical information - The machines main mechanism is mechanical and pneumatic controlled. - The PLC electronic circuit has been used in this machine . - Weight adjustment : Auger filling system. In order to produce bags of different weights, different diameters of auger and pipe shall be used. - Dimensions of the bags : Width: min. 65mm. –max. 170mm. In order to obtain different dimensions of bags width, it is necessary to use different “forming shoulder and pipe”. Length: min. 75mm – max. 320mm.(photocell controlled) - The main frame of the machine size: 120cm (width)-180cm(depth)-300cm(high). - Electric: Three phase, 380-volt - 4kw/h – 50hz. - Air need: 100 liter/minute (As the mechanical and pneumatic controls are used at the same time, the air usage is less than the other pneumatic machines.) - Machine speed : 30-45bags/minute Helicoid (screw)feeding system. (Elevator for powder products)It is necessary when automatically feeding required. This used to be feed the machine hopper from the floor level.

HPR_SV5000 Work with Perfect Match Of Mechanic and Servo Motor Technology Standart of Servo Motor Performed On Horizontal Jaw and Film Pulling System Work Fast ,Sensitive And Stable With Servo Motor Technology User Frindly ,Nearly there is no Maintenace need Control by digital touch screen size of 10 " contains 65536 color long-term Coating magnetic insulator used for coating machine parts Roller group owning air shaft for rapidly connect packaging material Lower Noise Level Stainless steel (Cr-Ni)Collar -Tube group Ability to Control the coil of packaging material Ability to Work , with and with out Photocells Production quantitiy can be control by set the machine target Dealy production control Alarm and diagnostic check system and option to see a feedback of past mistake Convergence and divergence the packaging material path by touch screen Change a Collar - tube grope without using any hand tools Easy and dynamic work with the machine system by the tochscreen Toch screen containing thermal Touch System High Safety windows Option to adjust horizontal Jaw working area in mm by using touchscreen Abilaty to adjust pack length in mm range with touch screen user panel

HPR_CM5000 Work with Perfect Match Of Mechanic and Servo Motor Technology Standart of Servo Motor Performed On Horizontal Jaw and Film Pulling System Work Fast ,Sensitive And Stable With Servo Motor Technology User Frindly ,Nearly there is no Maintenace need Control by digital touch screen size of 10 " contains 65536 color long-term Coating magnetic insulator used for coating machine parts Roller group owning air shaft for rapidly connect packaging material Lower Noise Level Stainless steel (Cr-Ni)Collar -Tube group Ability to Control the coil of packaging material Ability to Work , with and with out Photocells Production quantitiy can be control by set the machine target Dealy production control Alarm and diagnostic check system and option to see a feedback of past mistake Convergence and divergence the packaging material path by touch screen Change a Collar - tube grope without using any hand tools Easy and dynamic work with the machine system by the tochscreen Toch screen containing thermal Touch System High Safety windows Option to adjust horizontal Jaw working area in mm by using touchscreen Abilaty to adjust pack length in mm range with touch screen user panel

Vertical Packaging Machines Vertical packaging machines are used for packing different products (food and non-food) into different style of bags that shaped by the packaging machine from the film roll. The direction of the movement of the film on the tube of the packaging machine is vertical – downwards. The vertical packaging machines work in two different motions; Intermittent Motion for normal speed and high performance continuous motion designed for high speed requirement. HIPOMAK packaging machines are the first in Turkey in terms of its mechanic, digital electronics and technology. Efficiency is the most important aspect of HIPOMAK packaging machines. They could be designed in every needed size. So, this is accepted as an evidence for sealing quality, efficiency and weight sensitivity. They works under a high security precaution, they have been designed to work 24 hours. They are Suitable for different types of filling system; multi-head weighers, Linear Weighers, volumetric dozing systems, Auger screw filling units. Sonoma CH250/CH350 Series The new Sonoma Series are modular high performance continuous motion vertical form fill and seal machines for traditional and fragile products. Continuous motion is a generic term that is used for various different motion technologies in the packaging industry and carries the meaning of mechanism that constantly movingwithout pausing. It is tested at the speed of 200 mechanical cycles per minute. The novelty of the continuous sealing system is that enables 100% hermetic seals to be obtained at high speeds and reduces the possible negative effects of the impact of the product falling against closed sealing jaws, or the seal itself, that can occur on standard intermittent machines. It is preferred not only for its speed but for preventing product breaking also. Main Features Continuous motion system Parts in contact with product in AISI 304 stainless steel Various Types of Bags, pillow, gusset, block bottom, string bags etc. Main machine movements (horizontal sealing group and film driving group) are driven by means of independent brushless Servo motors. Motion-controller system is only one controller capable of coordinating all the servo motors, all the inputs-outputs, all the control functions of the line, replacing the PLC. Continuous Vertical and Horizontal Sealing ensure 100% non-leakage and smooth sealing 12” industrial PC man-machine interface (Diskless, Fan-less, low power) that uses a Microsoft Windows XP Embeddedoperating system with capability of remote access through internet and software updating easier. Extremely simple and easy to manage all machine parameters. P.I.D Heating System provides precision and stable horizontal and vertical heat sealing. Film Cut-off is controlled by photo eye on registered film or by incremental encoder on neutral films. Auto-Film Centering System adjusts independent roll support to center the film on the tube collar automatically. Out-of-filmSignal with automatic stop of the machine and quick connection between the finished roll and the new roll. Auto Film-Unwinding Unit controlled by expansion type reel-holder shaft with independent motor Self-Centering Drive Belt controlled by adjustable pneumatic pressure feeds the Film precisely. Film Tension Sensor indicates sufficient film tension. Dancer Arm Roller provides continuous smooth tension for continuous bag forming and registration. Safety is obtained by Automatic stop of the machine in case of incorrect closure of the safety doors or operation malfunction, with message on the display Screen. Different Filling Systems Adaptable for Multi-head Weigher, Linear Weigher, Volumetric Dosing, Auger Filler, Piston filler etc. Wrapping materials; Polypropylene, laminates and coupled materials in general, barrier film, water-soluble film, film of biological origin, and other heat sealing materials such as polyethylene. Suitable for CE standarts OPTIONAL FITTINGS/EQUIPMENTS Adaptable for different sealing systems such as; impulse sealing, carrier handle bag, easy-open bag, euro-slot bag, round hole bag, string bags, straight cut, tear notch cut, and zig-zag cut. Side Gusseting System for producing squared bottom bags. Vacuuming Supported Belts (extend belt life time and exceed speed of the machine up 15%) Gas Flushing System. Air conditioning on the control cabinet. Static Eliminator. Printer. Auto Splicing Unit.

SAM VPM 900 VERTICAL FILLING AND PACKAGING MACHINE WITH MULTIHEAD WEIGHER is suitable for filling and packaging granular products from 20gr up to 1kg. The machine is either equipped with a 10 heads or 14 heads weigher. With the feeding through an elevator or directly from the bunker, the required amount of the product is filled into the bag. The machine uses ready material rolls. The required bag type is formed. Then the filling process is finished by sealing. The machine can be equipped with feeding systems, photocell systems and printers.