Aragonit Cement Based Perlite Machine Plaster-832

Product Code: A6034

Product description: Interior and exterior bricks, gas concrete, pumice the surfaces such as walls, briquette machine which can be applied with adhesive and cement based plaster finishing coat machine that allows comfortable application.
Uses: In particular brick, concrete, masonry materials such as stone surfaces provides the application with the machine. High adhesion stability. Applied with the machine and have a product ready for time and labor. According to the old plaster is harder, smooth and impact resistant surfaces. One coat application, making the process of both rough and plaster. Expanded perlite reduces the load of the building through except for the building of thermal insulation and sound insulation. Made up of natural ingredients for decomposition. It allows breathing through the pores of the perlite made.
Application For Advance Preparation: Application will be made to ensure that the surface hardness status, water absorbency, the robustness is controlled before. In the case of water-absorbing surface of water absorbency of the surface using a Waterproofing additive Aragonite. On the surface gaps and repairs to be done to repair is done with previously Aragonite repair mortar. Plaster process temperature and humidity of the air before the surfaces according to the State to be soaked with water. Gas concrete and similar structures with high water absorbency, at least 72 hours prior to the application of the front spreader operation should be performed. Surface smoothness and brightness of concrete surfaces and walls prior to the application, together with the lining of the surface of the front spreader must be implemented. The surface can be implemented after it dries.
Mixing and Application: Cement-based machine plaster should be applied with a minimum of 6-8 mm. thick. 8 mm. thickness of one layer can be made up to the application. 8 mm will be applied thicker than 1. Since the completion of the fold after after applying the plug 2. coat may be applied. For a smooth plaster, custom aluminum gauge to avoid breakage of profiles and corner profiles should be used. Implemented into strips horizontally between two ano cement based plaster with custom aluminum gauge profiles machine. Plaster is sufficiently Pliant (when pressed with finger shape), the operation on the surface. The surface with a damp sponge. After the application machine and the spray hose should be cleaned with water.
After application the application tools should be washed with plenty of water. The operation cannot be performed on the application expired material and must be cleaned from the surface. Hardened and Sockets have completed the material will not be available.
Mixing ratio: 50 kg. products mixed with an average of 12 – 13 litres of water.
Consumption quantity: 1 m2 for the average 6-8 kg. (1 cm. thickness of application)
Application Thickness: 8-10 mm. (single layer)
Color: Gray, White
Packing: 50 kg. (3-ply kraft paper bag)
Maturation time: 5 minutes
Cap life: 3-4 hours (may vary according to Ambient conditions.)
Shelf Life: As of the production date 12 months (Dry and humid environment)
Storage: Dry and humid environment, unopened, stacked up to eight sequences are stackable.