Aragonit Cement Based Machine & Hand Plaster-831

Product Code: A6030

Fields of Usage: It is cement – based machine and hand plaster which can be applied on surfaces, such as brick, aerated concrete, bims, briquette wall etc. and can provide adherence and easy application.
Application: The application surfaces should be cleaned from materials, such as dust, dirt, mould oil, paint. Before the application, the surface should be checked. If there are parts which need to be repair, firstly these parts should be repaired by using Aragonit repair mortars. Before the plastering operation, the surfaces should be wet with water according to the weather’s heat and humidity condition. With the materials which have high water absorptivity, initiative sprinkling operation should be applied minimum 72 hours before the application. Before the applications with surfaces which have face smoothness and brightness, the initiative sprinkling operation should be applied with surface undercoat. After the surface dries, the application can be started. After the preparation process of surface fort he application is completed, the cement-based machine and hand plaster is mixed with a machine which can make mixing and spraying and then the plaster is sprayed to the surface. The cement-based machine and hand plaster should be applied in thickness of minimum 8-10 mm. The application can be made on one layer till thickness of 2 cm. if it will be more than 1,5-2 cm. after the first layer is applied and its plug is completed, the second layer can be applied. For smooth plaster, special aluminum template profiles must be used. To prevent the fractures at the corners, corner profiles must be used. The cement based plaster which is applied between two panels in horizontal bands is jigged with special aluminum template profiles. When the plaster hardens enough (it is not excavated when it is pressed with finger) the surface is smoothened. The surface is completed with a moist sponge. It can be put at most 8 lines. The temperature fort he circumstances where the application is made should be at least +5 °C, +35 °C. It should be stored in a way to prevent from moisture.
Rates of Mixtures: For a package of 35 kg. it is mixed with 8-9 liters of water
Consumption Amount: Averagely 13-14 kg. for per 1 m2 (1cm. thickness)
Color: White and Gray
Pot Life: 2 hours
Shelf Life: 1 year in dry and humid-free environment
Stocking: Max. 8 packages can be piled
Package: 35 kg. craft package

Cautions and Precautions
• It is more resistant to outside factors (such as rain, sunlight, wind etc) than other old plasters.
• The surface of plaster should be protected against outside factors, such as rain, sunlight, wind etc.
• It must not be mixed with any kind of cement based machine plaster product (i.e. lime, sand) or material.
• Since it is cement based product, the plaster surface should be watered occasionally in 7 seven days to increase its strength.
• Plaster net can be used in the places where the movement occurs, especially joints of door, window and building
• The cement based materials shouldn’t be breathed directly and their contact with skin should be avoided. During the process, protective clothes should be put on.
• It brings advantage for time and labor accelerating the plaster applications.
• It provides surfaces which are harder, smoother, and more resistant to strokes.
• Being applied to one layer, it fulfills operations of both scratch coat and finishing coat.