Aragonit Floor Hardener-834
Product Code: A8010
Description: The product is polymer-contributed floor hardener and is quartz aggregated which has high resistance. It is applied on the fresh concrete by sprinkling or spreading. It is special cement which improves the resistance of concrete to being dusty, abrasion and chemical substances.
Fields of Usage: The application surfaces should be cleaned from materials, such as dust, dirt, paint etc. If there is any swelling or rising on the surface, these are cleaned. The clean surface is saturated with water. this process is made 24 or 48 hour before the application. Before the application, under-alum-undercoat application is made. Otherwise the air which rises from application surface may cause bubles on the surface. After all these processes, application can start.
Application: It is recommended that the concrete should be poured, leaving joints in the shape af panels, being supported with steel wicker or fiber and being placed with vibration. The resistance and dosage of the concrete are important. It is applied, just after pouring of the concrete, when no visible humidity remains on the surface, and before the concrete absorbs its water. The sprinkling application is implemented in two steps after the concrete gains its flexible resistance. 2/3 part of whole material should be spread on the surface of the concrete by sprinkling and spreading with the help of squeegee or machine. The material which has been spread should be waited to get dampen by absorbing the water of concrete (it should change its color) if necessary, the surface should be moistened by sprinkling water and the suface hardener material’s integration with the concrete should be provided by making disc polishing (helicopter tray polishing) In the second step, the remaining 1/3 part of the material is sprinkled to the surface equally. Making machine polishing again, the surface becomes smooth and flat.
Cautions and Precautions
• Application surfaces should be free from elements, such as dust, dirt, sweeps, oil etc.
• The mixer’s working rate should be maximum 120 speed.
• The prepared mortar should be consumed within 2 hours
• No additives other than water should be put into the material
• The surface should be protected from wind, water and sunlight during application
• The cement based materials shouldn’t be breathed directly and their contact with skin should be avoided. During the process, protective clothes should be put on
Rates of Mixtures: For a package of 25 kg. it is mixed with 12-13 liters of water
Consumption Amount: Averagely 4,5-5 kg. for per 1 m2 (3mm.)
Color: Gray
Pot Life: 2 hours
Shelf Life: 1 year in dry and humid-free environment
Stocking: Max. 8 packages can be piled
Package: 25 kg. craft package