Aragonit E-X Plus Adhesive Mortar-863

Product Code: A4020

Product Description: It is acrylic copolymer based, containing modified chemicals general purposeful adhesive mortar material. It is a special mortar having high adhesion endurance which provides adhesion of lining materials to each other. In other words, it is used for adhesion of different materials such as ceramic to ceramic, glass to metal.

Uses: It is used for bonding as vertical and horizontal on interior and exterior facades of buildings, flor and wall ceramics, granite, marble, glass mosaic, furring brick, slate, cutting travertine, natural materials of concrete surface, plaster, cement finishand wall surfaces, to the metal and wood. It can be adhered to faience above faience, ceramic above ceramic. It is used for adhesion of EPS, XPS, stone wool, glass wool, jamb, insulating and decorative plates. It has high endurance stability. It is easy to use and not slippery. It is durable and long lasting. It has elastic properties. It provides saving of time. Its humid endurance is high.

Preparation: Application of surface roughness to be made, water absorption, stability is checked beforehand. If the high water absorbency of the surface water absorption of the surface is removed using Aragonit waterproofing additives. Previously made repairs to be done on the surface of the ground space and repairs. The surface coating of dust, dirt, debris is cleaned from factors such as oil.

Mixing and Application: Liquid part is put into a clean container and above it powder part is put into slowly until a homogenous mixture has been obtained. Low speed mixer is used for admixture. Mixing with a high speed mixer prevents obtaining homogenous admixture. This mixture is left to settle 5 minutes and after mixing it again, it is ready to be used. Dredging is done to measurement of bonding material by applying mortar to the surface by using a dredging shovel. On heavy bonding materials application of bonding materials of facade, it should be adhere by spreading the mortar as a thin plate. Bonding material is adhered to the mortar which is dredging is done by using rubber. mallet. After the application, application equipments should be washed with plenty of water. Adhesion shouldn’t be done on the material whose pot life is overdue and it should be cleaned from the surface. Material in the container which is hardened and completed setting shouldn’t be used.

Mixing ratio: 10 kg. powder part 5 kg. the liquid part; 7,5 kg. powder part 2,5 kg. the liquid part; 1,125 kg. powder part 0,375 kg. is mixed with the liquid portion.
Consumption: Average for 1 m2 3,5 - 4 kg. (8x8 mm. comb size) This rate varies according to the thickness of coating material and application.
Pot Life: 2 hours
Packaging: 1,5 kg. - 10 kg. and 20 kg. Plastic bucket
Shelf life: Store in a dry environment is 8 months as of the production date. The product +5°C and +30°C should be stored between.
Storage: Its unopened packaging in a dry environment as well as piled on top of the other in no more than 3 can be stored.
Ripening time: 5 minutes


Issues to be considered:
• The application surface of dust, dirt, spills should be cleaned of factors such as oil.
• Material must be mixed with a maximum of 120 speed mixer assistance.
• The mixture should be consumed within 2 hours.
• Any contribution material outside material into the water (lime, sand, cement) should never be placed.
• Caulking should be made at least 24 hours after the bonding process, the surface should not be exceeded during this period and must be protected from water.
• The application and the application surface after application of external factors (wind, sun, moisture) must be protected.
• The empty packing containers should not be used as a drinking water container.