Aragonit Ceramic & Tiles Adhesive Plus +-808
Product Code: A1200
Description: cement-based, reduced sliding properties, enhanced with special chemicals, high performance adhesive.
Fields of Usage: pedestrian, and freight traffic where there are schools, hospitals, malls such as buildings, interior and exterior in large size ceramic, granite, porcelain, ceramic and marble of concrete surface coating materials such as plaster, screed and wall surfaces used to cover horizontally and vertically. High adhesion stability.
Application: 6 - 7 lt. clean water is added slowly and the mixture is discharged into the container and mixed until a homogenous consistency is obtained on the glue. To the mixture, a low-speed mixer is used. Mix with high speed prevents the development of homogeneous consistency. After waiting for 5 minutes for the duration of ripening, re-mixed mortar is ready to use. By applying mortar to the surface correspond to the size of the tile with ceramic comb carding is done. Heavy and exterior applications the coating material, the coating material must be glued by applying a thin layer of mortar to the back of. Coating materials pasted into the combed mortar using a rubber mallet. Application tools should be washed with water after application. Expired the application cannot be processed and must be cleaned from the surface on the material. Completed hardened material in the container and outlet cannot be used.
Mixture ratio: 25 kg. product average 6 - 7 lt. it is mixed with water.
Consumption: 1 m2 for an average of 4 - 4.5 kg. (8x8 mm. comb size)
Color: Gray, White
Pot Life: 2 hours
Packing: 25 kg.
Shelf Life: 1 year as of the production date store in a dry environment.
Storage: In its unopened packaging in a dry environment as well as other piled on top of up to 8 can be stored.
Ripening Time: 5 minutes
Open Time: The adhesion of the coating must be within 20 minutes. Extreme temperatures, winds and low humidity depending on factors such as intense, this period is shortened.
Cautions and Precautions:
• The application surface dust, dirt, debris, oil should be cleaned from factors such as.
• The material should be mixed with up to 120 speed mixer.
• The mixture should be consumed within 2 hours.
• Any material except water and additives (lime, sand, cement, etc) definitely should not be placed.
• The application and the application surface after application of external factors (wind, sun, humidity, etc) should be protected.
• Caulking paste must be made at least 24 hours after the procedure, and should be protected from water on the surface within this period you should avoid.
• During the application protective equipment (clothing, such as gloves) should be used.
• Hand, eye and body avoid contact with eyes in case of contact, wash immediately with plenty of water and if necessary, a doctor should be consulted.