Aragonit Anti - Bacterial Joint Filler ( Fuga - Sealant )-824
Product Code: A2040
Description: The product which is based on cement and resistant to unpressurized water and bacteria is a filling material having many application aptions.
Fields of Usage: It is used to fill the joint gaps of covering materials such as ceramic, faience, marble, granite and natural Stones etc. in both internal and external places.
Application: 20 kg. Aragonit joint filler is mixed with 5-6 liters of water with a low-speed mixer until a homogenous mixture has been obtained without any roundish lumps. This mixture is left to settle approximately for 10 minutes and after mixing again, it is ready to be used. Dust, dirt, debris, oil etc. on the surfaces on which the mortar will be applied should be cleaned. The mortar is applied with a rubber trowel and straightened with rubber mat. After 1 hours following the application, the joints are cleaned with wet sponge. The pool can be filled with water 72 hours after the application cautions and precautions.
Cautions and Precautions
• Application temperature should be between +5 and +35 C degrees.
• Application surfaces should be free from elements, such as dust, dirt, sweeps, oil etc.
• The mixer’s working rate should be maximum 120 speed.
• The prepared mortar should be consumed within 2 hours
• No additives other than water should be put into the material
• The surface should be protected from wind, water and sunlight during application
• The cement based materials shouldn’t be breathed directly and their contact with skin should be avoided. During the process, protective clothes should be put on
• Joints should be clean
• Joint filling should be applied 24 hours after ceramic plastering
Rates of Mixtures: For a package of 20 kg. it is mixed with 5-6 liters of water
Consumption Amount: 0,5-0,7 kg. for per 1 m2
Color: White and Colored
Pot Life: 2 hours
Shelf Life: 1 year in dry and humid-free environment
Stocking: Max. 10 packages can be piled
Package: 5 kg. – 10 kg. - 20 kg. craft package