Aragonit Ceramic & Tiles Adhesive-809

Product Code: A1201

Product Description: Normal hardening cement-based is ceramic tile adhesive with high stability.
Uses: Floor and wall ceramic; concrete, mortar, grout and the wall surface are used to cover the horizontal and vertical. It has high adhesion stability. Does not slip, it is easy to use.
Preparation: Application of surface roughness to be made, water absorption, stability is checked beforehand. If the high water absorbency of the surface water absorption of the surface is removed using Aragonit waterproofing additives. Previously made repairs to be done on the surface of the ground space and repairs. The surface coating of dust, dirt, debris is cleaned from factors such as oil.
Mixing and Application: 6 - 7 liters. the mixture is poured into fresh water on the adhesive container and slowly added to the stirred until a homogeneous consistency. Low speed mixer is used to mix. Homogeneous mixing prevents the formation of a high speed. Wait 5 minutes after the maturation time is ready for use again stirred slurry. Measure the surface of the ceramic tile mortar applying carding combs made. In heavy coating and exterior applications, the fees shall be affixed on the back portion of the coating material by applying a thin layer. Coating materials are glued onto the combed mortar using a rubber mallet.
Application tools should be washed with water after application. On the application process can not be expired material and the surface must be cleaned. Hardened and used material in the vessel has completed the outlet.
Mixing ratio: 25 kg product an average of 6 - 7 liters. admixed with water.
Consumption: average for 1 m2 4 - 4,5 kg. (8x8 mm comb size)
Colour: Grey, White
Pot Life: 2 hours
Packaging: 25 kg. (3 times in kraft bags, as Stretching)
Shelf life: dry and moisture environment as the production date is 1 year.
Storage: Store in dry and humid conditions with unopened package stored stacked on top of more than 8.
Ripening time: 5 minutes
Potlife: Depending on the ambient conditions can be used after mixing for 2 hours.
Open Time: You must be within 20 minutes of adhesion of coating materials. Extreme temperatures, this time will be shorter depending on factors such as heavy wind and low humidity.