Power Trowel Machine -638

Product Code: P-900

Original Honda engine assurance
Fuel Type: Gasoline
It has an electronic circuit breaker system that will stop the machine by automatically stopping the motor when the machine is out of control. The system control arm is where the user can easily reach on the holding arm.
There is only one lifting hook in the center of gravity so that the machine can be lifted safely and balancedly.
The gas and stop arm are easily accessible to the user on the cable retention arm.
Supported brace joints are used for breaking against the reducer link with the arm.
It is capable of finishing 900mm with trowel manufactured from 4 pieces of hardened steel.
Knife rotation speeds compared to revolutions during polishing are 139 RPM.
During troweling trowel blades can be inclined from 0 ° to 20 °.
The trowel is mounted on the arm of the adjustment gauge. The butterfly arm that provides swivel is easily accessible on the arm.
Fasteners are suitable for Polyemid trowel mounting.
It is a floor treatment equipment used in the processes of polishing, smoothing and polishing concrete surfaces. The main uses of concrete concretes, car parks, industrial and commercial buildings, warehouses, airports and shopping malls.